Category Archives: Inventions

Discussion on new technology and inventions.

Electric Car Invented, will Tesla succeed after all this time ?

130 years ago the World’s first electric car was built by Victorian inventor in 1884 …
Thomas Parker: World’s first electric car – built by Victorian inventor in 1884. Thomas Parker is in the light suit in the front of the car.

First practical electric car, built by Thomas Parker in 1884.
Rechargeable batteries that provided a viable means for storing electricity on board a vehicle did not come into being until 1859, with the invention of the lead-acid battery by French physicist Gaston Planté.
Thomas Parker, responsible for innovations such as electrifying the London Underground, overhead tramways in Liverpool and Birmingham, built the first practical production electric car in London in 1884, using his own specially designed high-capacity rechargeable batteries. Parker’s long-held interest in the construction of more fuel-efficient vehicles led him to experiment with electric vehicles. He also may have been concerned about the malign effects smoke and pollution were having in London.
An alternative contender as the world’s first electric car was the German Flocken Elektrowagen, built in 1888.

Electric cars were reasonably popular in the late 19th century and early 20th century, when electricity was among the preferred methods for automobile propulsion, providing a level of comfort and ease of operation that could not be achieved by the gasoline cars of the time. Advances in internal combustion technology, especially the electric starter, soon lessened the relative advantages of the electric car. The greater range of gasoline cars, and their much quicker refueling times, encouraged a rapid expansion of petroleum infrastructure, which quickly proved decisive. The mass production of gasoline-powered vehicles, by companies such as the Ford Motor Company, reduced prices of gasoline-engined cars to less than half that of equivalent electric cars, and that inevitably led to a decline in the use of electric propulsion, effectively removing it from the automobile market by the early 1930s.
So what has changed? What makes the Tesla so different then the electric vehicles of the 1930’s and all the reasons that made them disappear. What has changed now in 2014 to make them survive? Do you think Tesla will pull this off 130 years after this invention came out?

Long Live Vacuum Tube Amplifiers !


IMG_0902Long Live Vacuum Tube Amps
Mar 17, 2014 by Lou Frenzel in Communiqué
Vacuum tube amplifiers just won’t go away. I am speaking more of audio vacuum tube amps than I am of microwave amps like magnetrons, klystrons, TWTs and the like. Most other audio gear is solid state so why are there still vacuum tube amps? My grandson asked me that recently and it was hard to explain this phenomenon. What I basically said is that vacuum tubes amps sound better than solid state amps, to some people. I had no way to follow up or demo this effect.

I have actually compared solid state audio power amps to the vacuum tube equivalents several times and using the same speakers. (It seems to me that the speakers would have more of an effect on the sound than the type of amplifier.) I could discern a difference between the two. I do not have the words to describe the difference. It is akin to comparing wines in a tasting. There are words for that but they are also vague and subjective to be sure. So it is with audio sounds. I have actually heard people say they can tell the difference between two different sets of speaker cables and connectors. I still don’t believe it.

So are vacuum tubes amps better? I’m not sure. They do still sound very good and for me it also depends on the music being played. Guitar players almost universally favor vacuum tube amplifiers. There are certainly enough vacuum tube audio power amp manufacturers to support the niche. I ran across one called Frenzel Tube Amps in Texas. No relation to me. These guys build custom amps for audio systems and musicians. And there are a dozen or so other tube amp companies. Amazing.

Not only that, I recently discovered a new book Building Valve Amplifiers, 2nd edition by Morgan Jones. It is a highly detailed book on the actual design and construction of tube amplifiers. Published by Newnes/Elsevier, the book covers planning, metalworking, wiring and testing. A real nitty gritty book for hobbyists and serious manufacturers. For example, the book details things like how to orient audio and power transformers to avoid problems of magnetic flux leakage from affecting other transformers or the tubes themselves. The test section is excellent. You may even learn where to find a loctal socket for a 7N7.

Incidentally the book is a companion to the book Valve Amplifiers, 4th edition also by Morgan Jones and published by Newnes/Elsevier. This is a serious design book with details on audio circuit design, equations and related topics. A 4th edition means that the book has been around for a while and is being updated and there is a real market for it.

Anyway, I no long have any tubes or tube equipment around. Very early in my career I worked as an engineer in industrial electronics and I recall that I could make almost anything I needed with a 12AU7, 12AX7 and/or a relay. The early germanium PNP 2N1305s did not cut it. Those days are gone for good. And even my ham gear is solid state although one can still buy RF power amps with multiple kinds of vacuum tubes. It is hard to beat them for power RF in the HF range. LDMOS amps are available too but more expensive. And I suspect we will see some GaN ham power amps at modest prices in the near future. But I am not betting on the demise of the vacuum tube.

3D Printing old inventions that have fallen into public domain!

3D printing breathes new life into old inventions

By Jacob Kastrenakes on 


The US Patent and Trademark Office may be the key battleground in today’s high-tech lawsuits, but it’s also home to a trove of inventions that have fallen into the public domain. Now patent lawyer Martin Galese is trying to bring some 21st century tech to the charming ideas patented in the 19th and 20th centuries. He’s dug up eccentric creations — from anEscher-esque building block to a combination comb and hair clip — and is rebuilding them using digital modeling tools, allowing anyone with a 3D printer to own a once-patented work from the past.

“You’re holding the 19th century by way of something that was produced in the 21st century,” Galese told The New York Times. Galese said that he sees the intricate drawings that accompany many patents as beautiful works of art, but that isn’t the aspect he appreciates most: the real idea of his Patent-Able blog, where all of his 3D models are featured, is to help people see the patent office as as wealth of ideas, and not just the impetus for endless legal battles.



Galese notes that there are over 8 million registered patents — and according to thePatently-O law blog’s estimates, only about 2.1 million of those were still in force last year. Just over a dozen patents have been featured so far on Galese’s blog, and he’s still on the lookout for “cool, weird, [and] surprisingly useful” ideas from the past to turn into 3D models. He uses MakerBot’s Thingiverse website — which collects and shares user-generated 3D models — to host all of his recreations. Galese thinks that it’s a fitting home for them: the patent office’s archives, he told the Times, are really just the “original Thingiverse.”